REPLACEMENT FIRE BRICK SET FOR CHARNWOOD ISLAND 2 (MK2
 
The Replacement Fire Brick Set For Charnwood Island 2 (MK2) consists of 4 fire bricks for the Island 2 and comes complete with instructions on how to fit.
 
Please Note: To be used with serial number 2658 and above.  If you have a serial number below 2658 please contact us.
 
 
 
INSTALLATION INSTRUCTIONS:

Installing the Charnwood Island 2 Set of Fire bricks is extremely easy and can be completed in around 5-10 minutes.
 
Remove the Throat plate , Fuel Retainer and any side and rear plates from the stove.
Before Removing the original bricks take note of the position in which they are fitted.
Remove original bricks and ensure any old adhesive is cleaned off the stoves body.  For stubborn adhesive you may need to use a wire brush.
Apply a small amount of silicone (Supplied) around the edges of the bricks and push them into position.
Fit support brackets back into position (If applicable).
Once fitted leave for a few hours before lighting for the silicone to set.