CHARNWOOD COVE 3 SET OF FIRE BRICKS (4) (MK1) - 011/PY29S
 
The Charnwood Cove 3 set of fire bricks are a Genuine Charnwood kit that consists of 4 fire bricks for the Cove 3 and comes complete with instructions on how to fit.
Please Note: This set is designed for the MK1 version sow ill fit any Cove 3 manufacturered between 2005-2013.  If in doubt please obtain the serial number from the appliance and contact us.
 
 
 
INSTALLATION INSTRUCTIONS:

Installing the Charnwood Cove 3 Set of Fire bricks is extremely easy and can be completed in around 5-10 minutes.
 
Remove the Throat plate , Fuel Retainer and any side and rear plates from the stove.
Before Removing the original bricks take note of the position in which they are fitted.
Remove original bricks and ensure any old adhesive is cleaned off the stoves body.  For stubborn adhesive you may need to use a wire brush.
Apply a small amount of silicone (Supplied) around the edges of the bricks and push them into position.
Fit support brackets back into position (If applicable).
Once fitted leave for a few hours before lighting for the silicone to set.