Charnwood Cove 3 Baffle/Throat Plate  - 010/PV31
 
The Charnwood Cove 3 Baffle/Throat plate is a high quality genuine steel plate that sits at the roof of the stove and provides protection to the roof of the stove to avoid damage to the flue.  The Cove 3 baffle plate slows down the flames within the stove to ensure more heat stays within the fire box before any heat travels up the chimney and ensures high efficiency.
 
 
 
Installation Instructions:

Installing the Charnwood Cove 3 baffle/throat plate is extremely easy and can be completed in around 5 minutes.
 
Remove the existing throat plate by simply grasping the small hook loacted at the front of the baffle plate.  This can be held using your hand or by using the tool.
slide the baffle towards you using the tool or your hand and the baffle should drop down.
Replace the new baffle by lifting the baffle up and over the retaining arms within the stove and slide the baffle down until it sits in place.
Give the stove a light firing for the next hour to allow the baffle to setlle.
 
 
INSTALLATION INSTRUCTIONS:

Installing the Charnwood Cove 3 Set of Fire bricks is extremely easy and can be completed in around 5-10 minutes.
 
Remove the Throat plate , Fuel Retainer and any side and rear plates from the stove.
Before Removing the original bricks take note of the position in which they are fitted.
Remove original bricks and ensure any old adhesive is cleaned off the stoves body.  For stubborn adhesive you may need to use a wire brush.
Apply a small amount of silicone (Supplied) around the edges of the bricks and push them into position.
Fit support brackets back into position (If applicable).
Once fitted leave for a few hours before lighting for the silicone to set.